Resin material suitable for high-precision dental model
that clearly expresses the fine details of the tooth surface.
It can be replaced for
all work using existing gypsum models
with high strength and low shrinkage and deformation.
Futuristic Low-Viscosity Dental Material – ODS Resin
Advantages of ODS Dental Materials
Low viscosity (1/10 to 1/14 level of viscosity compared to other resins)
For dental 3D printer only (Both LCD and DLP methods are available)
Realization of natural tooth color (Shade)
Holds most of domestic and foreign certificates (KFDA, FDA, CE, ISO, GMP)
Able to implement of sophisticated shapes (hexa structure, etc.)
Odorless (no odor), no skin trouble
Excellent mechanical properties (strength + elasticity) – Able to replace natural teeth of “Permanent” Resins
Abundant clinical completion (For example, the world’s first clinical success for Modelless Direct Clear Aligner)
High temperature sterilization (autogravable) possible at 135˚C (high heat resistance at 200˚C)
No uncured extracts in the oral cavity (Fully cured or not can be identified)
Comparison of low/high-viscosity materials
High viscosity materials (Other Reains)
Comparison of high/low-viscosity materials
Low viscosity materials (ODS Resins)
Damage to the properties due to layer separation of the material Need time and separate equipment (Mixer) for reuse
No layer separation, so easy to implement physical properties. Quick and easy to use!
Waste of materials due to a large amount of residue in containers, printouts, molding plates, and vat Difficult to clean containers, printouts, molding plates, and vat, wasting time and money
Loss of material
Almost no loss of resin and easy to clean as it leaves almost no residue!
Possible to print about 800~900 single crowns based on 1Kg.
Possible to print about 1,000~1,200 single crowns based on 1Kg.
Cost increase due to frequent replacement by damage to the film, Decrease in equipment durability
Durability of equipment
Almost no damage to the film during printing! Minimize impact on durability of equipment!
Difficult to evacuate air bubbles in resin Influence the physical properties (strength) intended by the manufacturer
Air bubble phenomenon
Easy to release air bubbles in the resin, no effect on physical properties (strength) intended by the manufacturer!
The 4 Core Technologies of ODS Resin
The development concept of ODS resin was first thoroughly started from the user’s point of view, and the core required properties were derived in consideration of the inconvenience of clinical reality and the user’s convenience. The 4 core technologies have been established from these core required properties, which are highly praised from all over the world. Currently, the 4 core technologies of ODS are applied to all resin product lines and are being produced.
Clinical Applications of ODS resins
ODS resins, world-class products have already been released in each dental field, including permanent, denture and surgical guide, especially Modelless Direct Clear Aligner, which is a recent issue, and clinical appliances are actively in progress.
The goal of ODS dental material is the resin
that can completely replace natural teeth
ODS Permanent resin is developed with the goal of completely replacing natural teeth and is implementing it. (strength 1.5 times, hardness 90%, Fracture Elongation Rate of 14.66% and elasticity higher than natural teeth)
ODS Permanent Resin
** ODS Permanent Resin : Single Crown with occlusal thickness of 2mm
2) Hardness comparison / Permanent (Single Crown)
Consideration for users – Small packaging(250g)
The 1kg of ODS Resin are packaged in small-capacity (250g) containers and opened by 250g each. Since the small-capacity packaging is not long in the consumption period and is convenient, ODS resins have a low risk of natural curing and is easy to use.
The total capacity (1kg) is exposed to UV rays in its natural state, and the risk of natural hardening such as chemical reaction and deformation is high, so the possibility of change of physical properties is high.
Even if it takes a lot of time and cost of injection and packaging, all products of ODS resin use a small amount(250g) of UV-blocking container for user convenience, so these have almost no possibility of physical property change.